FEATURED PRODUCT

EFI, Turbo, Super-Charger, Big Bore, Inverted oil & Camshafts

Vi har igjennom flere år utført injection konverteringer av flere typer motorer. Rotax, Jabiru, Vw, Verner mm. Vi har i dag akkumulert ca 400timer i Norge og over 300.000timer på verdens basis. Antall timer i Norge vil komme til å kunne øke drastisk de neste årene.

EFI, Turbo, Super-Charger, Big Bore, Inverted oil & Camshafts

Active filters

EFI + Ignition for...

EFI + Ignition for...

Price kr0.00
kr0.00 ex.VAT
Available with single or dual ECU With or without single or dual electronic controllable ignition Dual fuel pumps Fully redundant +15% power Save fuel and run on MOGAS
ADD TO CART
EP Turbo Charger w/oil sump

EP Turbo Charger w/oil sump

Price kr14,000.00
kr14,000.00 ex.VAT
Turbo will work on a 912UL or 912ULS turbo conversion or as a replacement for 914 but with removal of the TCU. Same turbo flange. The outlet flange on this turbo is slightly different from the 914...
ADD TO CART
Big Bore Kit 912

Big Bore Kit 912

Price kr0.00
kr0.00 ex.VAT
Finally EdgePerformance billet big bore cylinders for 912 / 914 engines. 1484cc 10.5 CR 114HP with carburetors 118HP with EFI 122HP with EP camshaft and EFI Comes with custom EP forged...
ADD TO CART
Fuel injection - Rotax 912

Fuel injection - Rotax 912

Price kr0.00
kr0.00 ex.VAT
This it not an OEM Rotax kit and it will void the engine waranty ! 2-1 intake ECU w/harness & sensors Dual pumps FPR Weld-on injector bungs EFI installation kit   Picture...
ADD TO CART
Fuel injection pumpe

Fuel injection pumpe

Price kr1,272.00
kr1,272.00 ex.VAT
High pressure fuel injection pump for our EFI system. Should always be install two in paralell. See our dual pump manifolds. Replacement pumps for excisting EFI customers.
ADD TO CART
EP Performance Camshaft...

EP Performance Camshaft...

Price kr0.00
kr0.00 ex.VAT
High lift, high power performance camshaft for 912 and 912 big bore engines. Heat threated Nitrated  CNC grinded Dyno optimized Bolt-on direct replacement 5-8% power gain Fits  all...
ADD TO CART
Big Bore Kit 912/914

Big Bore Kit 912/914

Price kr0.00
kr0.00 ex.VAT
EdgePerformance billet big bore cylinders for 912 / 914 engines. 1417cc - TURBO 8.3:1 CR Dyno proven up to 177HP. Normal output on a 914 is 135-140HP. On the EP912STi this kit will produce...
ADD TO CART
EP 914 turbo exhaust system

EP 914 turbo exhaust system

Price kr0.00
kr0.00 ex.VAT
EP performance exhaust for 912-Turbo conversions or 914 replacement. All S321 stainless steel +2mm piping (32mm OD) CNC machined slip joints (NO LEAKS) TIG welded with argon shielding purge...
ADD TO CART
EP Turbo Performance...

EP Turbo Performance...

Price kr0.00
kr0.00 ex.VAT
High lift, high power performance camshaft for 912/914 Turrbo and 1417cc big bore engines. Heat threated Hardened CNC grinded Dyno optimized Bolt-on 5-8% power gain Fits 1211-1417cc
ADD TO CART
Big Bore Kit 912

Big Bore Kit 912

Price kr0.00
kr0.00 ex.VAT
Finally EdgePerformance billet big bore cylinders for 912 / 914 engines. 1621cc 10.5:1 compression ratio 120-130HP Comes with custom EP forged pistons with CT-3 moly coating Allows the use...
ADD TO CART
Dual fuel injection pumps...

Dual fuel injection pumps...

Price kr3,360.00
kr3,360.00 ex.VAT
Dual light weight pumps for our EFI kits. Suits all EFI kits or applications. Pressure tested to 65PSI. Normal operating pressure is 35-45PSI set on the fuel pressure regulator. We use a 3-pos...
ADD TO CART
EP mil-spec harness

EP mil-spec harness

Price kr0.00
kr0.00 ex.VAT
EP mil-spec ECU/EFI harness. Comes with unique Serial and Part No. Built to mil-spec Raychem DR-25 shrink tube/boots Raychem 55A tefzel cable Raychem RT125 Seal/Joint Epoxy BOSCH / DEUTSCH...
ADD TO CART
O2 / Lambda sveisemutter

O2 / Lambda sveisemutter

Price kr207.00
kr207.20 ex.VAT
O2 / Lambda for welding onto the downpipe "exit exhaust pipe" to measure the A/F reading when tuning either carbs or EFI. S304 stainless steel Radius cut for easy welding CNC machined Hux...
ADD TO CART
jabiru dyseboss

jabiru dyseboss

Price kr455.00
kr455.20 ex.VAT
Dyseboss designet for påsveising på jabiru innsugsrunnere. Bunndel av stål mens toppdel er laget av aluminium for vektbesparelse., Skjermet for strålingsvarme fra eksosen. Pris per stk
ADD TO CART
40mm CNC Throttlebody

40mm CNC Throttlebody

Price kr2,232.00
kr2,232.00 ex.VAT
Complete 40mm throttle body with bracket, bolts and o-ring. As used on our dual throttle body design, WITHOUT TPS SENSOR. Please specify when ordering.
ADD TO CART
55mm CNC Throttlebody

55mm CNC Throttlebody

Price kr2,392.00
kr2,392.00 ex.VAT
Complete 50mm throttle body with bracket, bolts and o-ring. As used on our EFI kits. Both the 2-1 and the 4-1 intake, WITHOUT TPS SENSOR. Please specify when ordering.
ADD TO CART
45mm CNC Throttlebody

45mm CNC Throttlebody

Price kr2,312.00
kr2,312.00 ex.VAT
Complete 45mm throttle body with bracket, bolts and o-ring. For use on Jabiru 2200/3300 EFI kits WITHOUT TPS SENSOR. Please specify when ordering.
ADD TO CART