FEATURED PRODUCT

EFI - ECU & Components

EFI - ECU & Components

Aktive filtre

Fuel injection pump

Pris kr 1,272.00
kr 1,272.00 eks MVA
High pressure fuel injection pump for our EFI system. Should always be install two in paralell. See our dual pump manifolds. Replacement pumps for excisting EFI customers.

Dual fuel injection pumps...

Pris kr 3,360.00
kr 3,360.00 eks MVA
Dual light weight pumps for our EFI kits. Suits all EFI kits or applications. Pressure tested to 65PSI. Normal operating pressure is 35-45PSI set on the fuel pressure regulator. We use a 3-pos...

Finned O2 / Lambda weld-on...

Pris kr 207.00
kr 207.20 eks MVA
O2 / Lambda for welding onto the downpipe "exit exhaust pipe" to measure the A/F reading when tuning either carbs or EFI. S304 stainless steel Radius cut for easy welding CNC machined Hux...

Weld on injector bosses

Pris kr 556.00
kr 556.00 eks MVA
Aluminum weld-on bosses Price ea. 2 piece construction CNC from 6061-T6 Alu Great for welding One per cylinder ULTRA LIGHT & ULTRA LOW PROFILE ! FOR PICO STYLE MICRO INJECTORS !

jabiru dyseboss

Pris kr 455.00
kr 455.20 eks MVA
Dyseboss designet for påsveising på jabiru innsugsrunnere. Bunndel av stål mens toppdel er laget av aluminium for vektbesparelse., Skjermet for strålingsvarme fra eksosen. Pris per stk

40mm CNC Throttlebody

Pris kr 2,232.00
kr 2,232.00 eks MVA
Complete 40mm throttle body with bracket, bolts and o-ring. As used on our dual throttle body design, WITHOUT TPS SENSOR. Please specify when ordering.

50mm CNC Throttlebody

Pris kr 2,392.00
kr 2,392.00 eks MVA
Complete 50mm throttle body with bracket, bolts and o-ring. As used on our EFI kits. Both the 2-1 and the 4-1 intake, WITHOUT TPS SENSOR. Please specify when ordering.

45mm CNC Throttlebody

Pris kr 2,312.00
kr 2,312.00 eks MVA
Complete 45mm throttle body with bracket, bolts and o-ring. For use on Jabiru 2200/3300 EFI kits WITHOUT TPS SENSOR. Please specify when ordering.

New style - Dual fuel pump...

Pris kr 3,680.00
kr 3,680.00 eks MVA
Our newest Dual light weight pumps for our EFI kits. Suits all EFI kits or applications. Also suitable for 912iS. Pressure tested to 65PSI. Normal operating pressure is 35-45PSI set on the fuel...

EP mil-spec harness

Pris kr 0.00
kr 0.00 eks MVA
EP mil-spec ECU/EFI harness. Comes with unique Serial and Part No. Built to mil-spec Raychem DR-25 shrink tube/boots Raychem 55A tefzel cable Raychem RT125 Seal/Joint Epoxy BOSCH / DEUTSCH...

Dual fuel pump rebuild kit

Pris kr 559.00
kr 559.20 eks MVA
Kit for rebuild/overhaul of the "new" dual fuel pump assembly. 2x o-rings for filter hex cap 8x o-rings for pump fittings 4x crush washers for pump fittings 1x sinter filter w/o-ring
EP 32A secondary alternator
  • På salg!

EP 32A secondary alternator

Pris kr 10,007.00
kr 10,007.00 eks MVA
EP 32A secundary alternator.  AL7075-T6 Anadized for corrosion protection Bolt-on with all hardware Ducati rotor, stator and regulator Totally independent system from the standard 20A...