TT21/TT22 short harness with TN72 wiring, 1 m

Artikkelnr.: 01991-00

Trig wiring harnesses ship ready to use. All Trig products come with a two year warranty, starting from the day of installation.

NOK3 078,00 inkl. mva.
  • Produktinfo
  • Features
  • Versions
  • Spesefications
  • FAQ

WIRING HARNESSES

Using high quality materials, Trig harnesses are fully tested, quality controlled and will provide you with a reliable, faster and easier installation. These harnesses are intended for light-sport, experimental and homebuilt aircraft owners.

Save time and frustration – order a compatible wiring harness with your Trig transponder.

COMPATIBLE TRIG PRODUCTS

Trig wiring harnesses are designed to be used with Trig compact transponders, with the option of including wiring for the TN72 GPS.

 

Product / Model  Length  Sales Part Number
Transponder short 100cm/39 inches with GPS input + ground wires 01989-00
Transponder short plus TN72  100cm/39 inches with TN72 GPS connectors 01991-00
Transponder long  300cm/118 inches with GPS input + ground wires 01990-00
Transponder long plus TN72  300cm/118 inches with TN72 GPS connectors 01992-00
Product / Model TT21/22 to TC20 TT21/22 power + ground GPS input + ground TT21/22 to TN72 TN72 power + ground Sales part number
Transponder short 100cm/39 inches 300cm/118 inches 300cm/118 inches N/A N/A 01989-00
Transponder short plus TN72  100cm/39 inches 300cm/118 inches N/A 100cm/39 inches 100cm/39 inches 01991-00
Transponder long  300cm/118 inches 300cm/118 inches 300cm/118 inches N/A N/A 01990-00
Tranponder long plus TN72  300cm/118 inches 300cm/118 inches N/A 100cm/39 inches 100cm/39 inches 01992-00

 

WHAT'S IN THE BOX

  • Trig wiring harnesses ship ready to use.
  • All Trig products come with a two year warranty, starting from the day of installation.

FREQUENTLY ASKED QUESTIONS

How do you connect Trig wiring harnesses to the aircraft electrical system?
The wiring harnesses come with connections for power and ground. A circuit breaker as specified in the installation manual should be used.

I need to remove a connector to install the harness in my aircraft?
In most installations, simply connect the wiring harness to the Trig unit and stow any excess wire in a safe and tidy way. If you need to remove a connection D-Sub to route the wires through a tight space in your aircraft, we recommend that you use an inexpensive crimp removal tool.

1. Open the Controller D-Sub connector - this is easier as there are fewer wires in this connector.
2. Use a crimp removal tool to carefully take out each wire and its connected pin.
3. Route the cable through the aircraft in a safe method.
4. When complete re-insert the pins into the Controller D-Sub.
5. Check and test the connections are correct and working.

This avoids having to cut wires and retains the superior reliability that a crimp connector offers over a soldered wire.